TViQ2 Surge Protection

Suitable for Figure 8 Power cables

RRP $299.00
SAVE $50.00 (17%)
In Stock

Calculate Shipping

Typically applicable to slimline flat screens wall mounted with brackets the TVIQ can also protect and enhance the use of projectors, notebooks, desktops, cash registers and tablets. It features patented SC regeneration technology and noise filtration protection from Electromagnetic Interference (EMI) and Radio Frequency Interference (RFI ).

How Does the Patented SC Regeneration Technology work?

The best way to describe this part is to use an analogy. Think of the S-TViQ circuit as an electronic shock absorber. When a power surge is present the S-TViQ absorbs the excess voltage, this is the patented SC section, like a shock absorber being compressed. Then the S-TViQ slowly, safely releases the surge of energy back into the mains power. The dangerous energy from the surge is diverted back into the power so that whatever it is protecting does not get exposed to any of the high voltage threat. Once all the absorption has finished the circuit is reset within a matter of seconds ready for the next incident, this is the regeneration portion of the circuit.

Traditionally power protection components will absorb spikes or surges but each time they are asked to absorb they reduce their ability to protect until eventually they exhaust their protection and need to be replaced. This is a significant difference to our Patented SC Regeneration Technology as the circuit is able to absorb the surge then release without compromising its ability to protect each time it is asked to defend against a spike or surge incident.

The circuit has been exposed to over 6,600 volts x 100 times in less than an hour and still operating at 100% efficiency and capacity showing no signs of degradation. A standard surge protection board may survive one or two similar exposures before at least being damaged or in the majority of cases completely exhausting its ability to protect.



  • Patented SC Regeneration Technology
  • Dynamic Active Tracking Filter circuitry
  • Subject to 6,600V x 100 times and survived
  • Over 23,000 Joules energy absorption
  • Slimline design to fit on wall brackets or POS systems
  • 6 Year Free Replacement Warranty
  • Designed and Engineered in Australia/New Zealand




Supply Voltage

240/Vac 50Hz

Maximum Current Rating

5amps/1200 WA (VA)

Clamping Voltage


Reaction Time

Less than 1 nano second

Maximum Energy Dissipiation

over 23,000 Joules (resettable by patented technology)

Protection Modes

Active and Neutral

EMI/RFI Noise Reduction Filter Type

Yes - Dynamic Active Tracking Filter Technology

Earth Leakage Range

Less than 1 milli amp

Operating conditions

Indoor/ AC Mains

Operating Temperatures


Safety Approval


Model No


Cable length



SKU thor-pb-tviq2
Brand Thor

Be The First To Review This Product!

Help other Complete Audio users shop smarter by writing reviews for products you have purchased.

Write a product review

We Also Recommend

A12 Surge Board

A12 Surge Board


Add To Wishlist

PS10 Power Station

PS10 Power Station


Add To Wishlist

You May Also Like

TViQ3 Surge Protection
17% OFF RRP $299.00

Others Also Bought

More From This Category